As summer descends upon Tarrant County, residents face scorching afternoons that transform their air conditioning units into the most overworked appliances in their homes. In North Texas, the cooling of residences constitutes over half of their summer electricity consumption. This is particularly significant in Texas, where households use considerably more power during the summer months compared to the national average, primarily due to relentless air conditioning during peak heat waves.
With increased demand on the local power grid, electricity bills can become a shocking reality for many locals. However, there are ways to manage costs without enduring uncomfortable heat. Fort Worth residents can reduce their seasonal utility expenses by implementing five practical strategies.
1. Optimize Your Thermostat Settings
Turning the thermostat down to a frigid 68 degrees after returning home from a day out will not cool your house any quicker. Thermostats manage the timing of system cycles rather than the speed of cooling. Setting the thermostat too low merely prolongs the compressor’s runtime, particularly in single-stage systems, or forces variable-speed units into less efficient modes, wasting unnecessary energy.
Homeowners can save up to 10% on their annual bills by adjusting their thermostat by 7 to 10 degrees for eight hours a day. Aim for 78 degrees while at home and increase it to 82 or 85 degrees when away to minimize unnecessary cooling.
Enhance your comfort without lowering the temperature by using ceiling fans. Running them counterclockwise creates a downdraft, making the air feel 3 to 4 degrees cooler. Remember that fans cool people, not unoccupied rooms, so switch them off when you leave.
2. Seal Air Leaks and Check Attic Insulation
No matter how advanced your HVAC system is, it will struggle if your home is not properly sealed. In older Fort Worth neighborhoods, like the historic Fairmount or mid-century Ridglea, unsealed gaps around windows, doors, and attic hatches allow hot, humid air to infiltrate continuously.
Attics are particularly problematic. During Texas summers, temperatures in attics can exceed 140 degrees. Without adequate insulation, this heat can penetrate your living spaces. Check the attic floor; if you can see the floor joists above the insulation, it’s too thin.
By applying silicone caulk around drafty windows, installing fresh weatherstripping on exterior doors, and ensuring attic insulation falls between R-30 and R-38—recommended by the Department of Energy for North Texas—you can significantly reduce heat gain and potentially decrease heating and cooling costs by around 15%, according to ENERGY STAR.
3. Prevent Solar Heat Gain Through Windows
Windows can be a major source of heat infiltration. Unshaded southern and western windows can allow sunlight to rapidly elevate indoor temperatures, forcing your air conditioning system to work harder during the hottest hours of the day. Simple window treatments can provide immediate relief:
Reflective Blinds and Blackout Curtains: Closing medium to heavy curtains on sun-exposed windows during peak hours can cut heat gain by up to 33%.
Solar Screens: Exterior mesh solar screens can absorb or deflect up to 70% of solar radiation before it reaches your windows.
Low-E Window Films: These films attach directly to the glass, filtering infrared rays while allowing natural light to enter.
By blocking sunlight before it heats your furnishings and walls, you can significantly lessen the thermal load on your cooling system.
4. Reschedule High-Heat Activities
Major appliances emit considerable residual heat. Running a dishwasher, clothes dryer, or conventional oven during peak daytime hours can warm your kitchen, prompting the air conditioning to activate to combat the additional heat. Consider these simple adjustments:
Operate dishwashers and laundry machines later in the evening or early in the morning when outside temperatures are cooler.
Instead of using a conventional oven, opt for air fryers, slow cookers, microwaves, or outdoor grills.
Wash laundry in cold water; heating water accounts for about 18% of a home’s total energy usage, but modern detergents perform effectively in cold cycles.
These minor adjustments can help reduce indoor heat sources while also lowering energy consumption.
5. Choose a Fixed-Rate Electricity Plan
In Fort Worth’s deregulated electricity market, homeowners and renters have the freedom to choose their Retail Electric Provider (REP). Although Oncor manages the physical infrastructure, your REP determines your electricity costs.
Many consumers fall prey to misleading promotional offers, such as “free nights and weekends” or complex “tiered rate” plans with restrictive credits. These often feature low rates that apply only within limited usage bands, resulting in significantly higher costs if you exceed those limits during peak heat.
The best defense against soaring summer bills is to opt for a clear, fixed-rate contract. Exploring competitive electricity options in Fort Worth enables you to secure a stable rate per kilowatt-hour, insulating your budget from unpredictable market fluctuations. Before committing, review the Electricity Facts Label (EFL) to verify base charges, delivery fees, and contract details.
By implementing these practical measures, Fort Worth residents can maintain their comfort and keep their energy expenses in check throughout the sweltering summer months.
